3429 Villamare Audio/Video Systems (Family Room)

Here are some general tips about the audio-videosystems at 3429 Villamare:

TV: To turn on. Use RCA Remote #1. Hit Green Power Button on top Center of Remote. Hit the Blue "Clear" Button to get rid of information screen. Sometimes when TV has been on for awhile you will have to turn on using the "TV" button on top right of remote. Same for turning off.

To add better sound to the TV system turn on SONY tuner. Use Audio Remote #4 or turn on

manually--its the right tuner under the TV. Hit the TV-SAT Button. By doing this sounds comes out of the 6 Sony Speakers in the room as well as the speakers in the TV. Adjust sound by turning Volumn

knob up or down or by using Remote #4 Master Volume Button.

DVD: To use the DVD player insert a DVD with the label up in the DVD player. Make sure the power is turned on. Hit Play. You can use remote #2 to do this. Hit the DVD button on the RCA Remote (#1) this will allow you to see DVD on the screen. Turn the Sony Tuner on--Hit CD (not DVD). This will allow you to see DVD on screen, hear the DVD through the RCA TV speakers and allow you to hear the DVD through the 6 Sony speakers. MAKE SURE TO HIT CD ON TUNER, NOT DVD TO HEAR DVD MOVIE.

CD: To hear a Audio CD, place audio CD in DVD player and hit CD on Tuner. CD will play.

You can use the DVD remote #2 to access tracks on CD's or DVD's. MAKE SURE TO HIT CD

ON THE TUNER TO HEAR THE VOLUME.

Tuner: To hear AM or FM Radio, turn on SONY Tuner. Hit the Tuner button. There is both

an antenna for AM and FM and reception should be good. Choose the station that you want

by using the station selection button on the right of the Tuner. To get best reception make sure

to turn TV off to hear the radio.

VCR: To play a VCR tape, turn VCR on through remote #3 or turn on manually. It is bottom left appliance. Turn on TV and turn channel to channel #3. Hit play and the VCR will play. To hear the VCR

audio through the 6 Sony Speakers hit the video button on the tuner, or sound can be heard by TV.

To record on either bedroom VCR or main VCR do the following. Turn the TV to channel #3. Give it a minute or so. Hit the channel button on the VCR (not the TV) until you come to the channel you want. Then hit Record. You will see the record button come on. If you don't see the word Record or REC on the TV screen it's not working. Try again.

All wires are wired correctly as of 11/04/04. Please do not try to rewire the system or change it. IT WORKS!

With respect to the speaker sitting on the ground to the left of the stereo system. It has an on/off button. To make it work you must turn the speaker on by depressing the on/off button. The SONY Tuner has about 5-6 different settings on the remote or on the main unit for different types of sound or "Surround Sound". Suggest you experiment to see which you like best. Have fun!

--Dan and Becky Regenold

(for bedroom tv's, vcr's and dvd's and high speed internet turn page)

2nd Bedroom VCR/DVD's

VCR: To play a VCR tape, turn VCR on through remote #3 or turn on manually. It is bottom left appliance. Turn on TV and turn channel to channel #3. Hit play and the VCR will play. To hear the VCR

audio through the 6 Sony Speakers hit the video button on the tuner, or sound can be heard by TV.

To record on either bedroom VCR do the following.

A. Turn on TV to Channel #3

B. On the VCR Remote hit the display key so that you can see display comments

C. On the VCR Remote hit the TV/Video Button--make sure it's on Video (You'll

see the word VIDEO show up on the VCR Display)

D. On the VCR Remote hit the Input Select Button. There are three choices Line1, Line2,

and the Channels.

E. Use the Channel Up/Down button until you come to the channel you want.

F. Insert a blank tape into the VCR. Hit record on the VCR. You will see the word REC in the bottom left if it is taping.

DVD: To play a DVD in the 2nd bedroom do the following:

A. Turn on the TV to Channel 3

B. Turn on the VCR (needed to play DVD)

C. On the VCR Remote hit the TV/Video Button--make sure its on Video (You'll

see the word VIDEO show up on the VCR Display)

D. On the VCR Remote hit the Input Select Button. There are three choices Line1, Line2,

and the Channels. Hit the Line1 Choice.

E. Turn on the DVD Player. Hit the Play Button and it will work.

To Connect a SONY Playstation or other Game Machine to the TV:

A. Turn on the TV to Channel 3

B. Turn on the VCR

C. On the VCR Remote hit the TV/Video Button--make sure its on Video (You'll

see the word VIDEO show up on the VCR Display)

D. On the VCR Remote hit the Input Select Button. There are three choices Line1, Line2,

and the Channels. Hit the Line2 Choice.

E. Turn on the Playstation or other Game Machine. Plug the inputs for the game machine

into the bottom front of the VCR (where it says Line 2. Have fun!

MASTER BEDROOM DVD PLAYER

DVD: To play a DVD in the 2nd bedroom do the following:

A. Turn on the TV to Channel 3

B. Turn on the DVD Player (button on left). Hit Play. Do not touch little black box at right of DVD Player.

HIGH SPEED INTERNET

We are not responsible for supporting Hi-Speed Internet or helping you hook it up. Please don't call us (sorry). Here are a few tips:

Wired Internet

If you are unsure about the wireless connection I suggest you use the wired approach. There is a 50 foot cable which has been left in the condo.

(check white end table with red lamp on top).

Place one end of this cable into the Router#1 on back(top blue box with the two antennaes on top of it). Do not plug it into the connection that says "internet". Run wire behind entertainment console along door behind couch and up through one of the sides of the couch. Plug into your ethernet port on your computer. You should be good to go. We are not responsible for the cable not being in the condo. Bring your own cable if connection is critical to your stay.

Wired Internet

Probably won't work or will be difficult to install unless you have Windows XP. Here are the settings you will need to install on your computer when you right click on the computer icon on your task bar--choose view wireless network and make these settings:

Network SSID: villamare

Network Authentication: Open

Data Encryption: wep

Network Key: FDF65F564C

Confirm Network Key: FDF65F564C

Key Index 1

Key is provided Automatically (don't check this box)

This is a computer ad-hoc network (Don't check this box)

Good Luck!

| Home| Unit Specs | Map of Villamare | Palmetto Dunes | Rates | Shopping/Kids|
Golf | Tennis | Average Temps | Dan & Becky | Check-In/Out | E-Mail